Description
- Optimized for 802.11ac standard
- 6 10G SFP+ uplinks
- Multiple link aggregation (LAG) support to protect against link failures while maintaining the optimal network connectivity
- Cisco ClientLink 2.0 technology to improve downlink performance to all mobile devices
- Cisco CleanAir technology, which provides proactive, high-speed spectrum intelligence to combat performance problems due to wireless interference
- RF management
- Provides both real-time and historical information about RF interference affecting network performance across controllers using systemwide Cisco CleanAir technology integration
- Optimized video delivery using single stream for both wired and wireless clients
- Supports Cisco VideoStream technology to optimize the delivery of business-critical multicast video applications across the WLAN
- Supports unified communications for improved collaboration through messaging, presence, and conferencing
- Supports all Cisco Unified Communications Wireless IP Phones for cost-effective, real-time voice services
- Consistent configuration CLI for both wired and wireless QoS through modular QoS CLI (MQC)
- Granular QoS policies per access point, SSID, radio, and client
- Fair bandwidth allocation across wireless clients on an access point
- Simplifies and centralizes security policies through downloadable ACLs
- ACLs are processed in hardware to provide line-rate performance
- Networkwide visibility with flexible NetFlow for wireless clients
- Organizations may choose to turn off access point radios to reduce power consumption during off-peak hours
- Integrated wireless LAN controller avoids the deployment of additional device in the network
- Secure, reliable wireless connectivity and consistent end-user experience
- Increased network availability through proactive blocking of known threats
- Supports IPv6 addressing on interfaces with appropriate show commands for monitoring and troubleshooting
- IPv6 ACLs are processed in hardware to provide line-rate performance
Device Type | Network management device |
Height (Rack Units) | 1U |
Width | 44.5 cm |
Depth | 45 cm |
Height | 4.45 cm |
Weight | 7.8 kg |
Networking | |
---|---|
Form Factor | External |
Ports Qty | 6 |
Connectivity Technology | Wired |
Data Link Protocol | Gigabit Ethernet,10 Gigabit Ethernet |
Switching Protocol | Ethernet |
Network / Transport Protocol | TCP/IP,UDP/IP,ICMP/IP,IPSec,ARP,BOOTP,DHCP |
Routing Protocol | CIDR |
Remote Management Protocol | SNMP 1,RMON,Telnet,SNMP 3,SNMP 2c,HTTP,HTTPS,TFTP,SSH,CLI |
Capacity | Manageable access points:50 |
Status Indicators | Port transmission speed,port duplex mode,power,system,status,link/activity |
Features | DHCP support,BOOTP support,ARP support,Syslog support,manageable,IPv6 support,SNTP support,Stateful switchover (SSO),Wi-Fi Multimedia (WMM) support,Access Control List (ACL) support,Quality of Service (QoS),RADIUS support,Cisco StackWise Technology,CleanAir technology,NetFlow,CAPWAP support,ClientLink 2.0 technology |
Encryption Algorithm | DES,Triple DES,RC4,MD5,AES,128-bit WEP,40-bit WEP,IKE,SSL,TLS 1.0,104-bit WEP,TKIP,WPA,WPA2,PKI,AES-CCMP,128-bit AES,AES-CCM,AES-CBC,DTLS,1024-bit RSA,2048-bit RSA,TLS 1.1 |
Authentication Method | RADIUS,Radio Service Set ID (SSID),TACACS,Extensible Authentication Protocol (EAP) |
Compliant Standards | IEEE 802.3,IEEE 802.3u,IEEE 802.1Q,IEEE 802.11b,IEEE 802.11a,IEEE 802.3x,IEEE 802.11g,IEEE 802.1x,IEEE 802.11i,IEEE 802.11h,IEEE 802.11e,IEEE 802.11n,IEEE 802.1AX,IEEE 802.11ac |
Expansion / Connectivity | |
---|---|
Expansion Slots | 6 (total) / 6 (free) x SFP+ |
Interfaces | 1 x management – RJ-45 1 x 1000Base-T (management) – RJ-45 1 x USB 2 x USB – Type A 2 x network stack device |
Miscellaneous | |
---|---|
Rack Mounting Kit | Included |
Compliant Standards | CISPR 24,EN 61000-3-2,EN 61000-3-3,EN55024,CISPR 22,AS/NZS 60950-1,UL 60950-1,IEC 60950-1,EN 60950-1,CSA C22.2 No. 60950-1,ICES Class A,VCCI Class A,EN 55022 Class A |
Power | |
---|---|
Power Device | Internal power supply – hot-plug |
Installed Qty | 1 |
Max Supported Qty | 2 |
Power Redundancy | Optional |
Voltage Required | AC 120/230 V (50/60 Hz) |
Power Provided | 350 Watt |
Manufacturer Warranty | |
---|---|
Service &Support | Limited warranty – advance parts replacement – 90 days – response time:10 days |
Environmental Parameters | |
---|---|
Min Operating Temperature | -5 °C |
Max Operating Temperature | 45 °C |
Humidity Range Operating | 5 – 95% (non-condensing) |
Reviews
There are no reviews yet.